TTS-100 Information  

Home Products
What's New
F.A.Q.
Suggestions
Catalogs / Manuals
Partners/Associates
Contact Us

 

 

 

Telephone Test System TTS-100

The TTS-100 is a telephone test system used in the refurbishing of telephones, or to verify telephone functionally. This unit works on DMS-100® (EBS) telephones as well as all Analog telephones.

Features

Analog Line Tests

  • Tests ringer

  • Side tones (Blow test)

  • Programmable % break and pulsing speed limits

  • Long, medium and short loop current limits

  • Link test

  • Release test

  • High voltage (120 VDC or 105 VDC) eg. testing of Unity lamps

  • DTMF testing

  • CLASS testing

  • Tip and Ring reversal

  • Functions as a DMS® switch providing dial tone and allowing the user to dial a call to an EBS® phone of one is connected.

EBS® Lines (P-Phones) Additional Tests

  • Strobes all LCD indicators on sets under test

  • Displays a preprogrammed message on display phone

  • Enables buzzer. ringer, turn on/off/flash/wink a key, using simple commands

  • Performs any EBS® code command by entering the address location of the set and the Hex command code

  • Sends characters directly to the display on a display phone

  • Operates as a monitoring device: the testing terminal will display all the signaling codes of the set(s) under test

  • Operates as a DMS-100® switch in EBS® mode: the TRS-100 will simulate the functions of a DMS-100® switch providing dial tone and allowing the user to dial a call to an analog phone if one is connected.

  • Operates in test mode: the user can enter a series of commands, save the test to disk and enable the test at any time.

  • Measures level of sets EBS® code transmission in mvp-p

Software Features

  • Can customize the sequence of tests for a POTS phone

  • Add, delete, or change the menu of POTS phones to be tested

  • Extensive Help screens

  • Will operate in automatic or semi-automatic test modes

  • Software supplied on 3 1/2" disks

  • Operates under MS-DOS® or Windows®

  • Report on number of phones tested each day by type

Computer Requirements

  • IBM PC compatible computer with hard drive and floppy disk drive, RS-232 serial port and 640 KB memory

  • Monochrome screen compatible (colour monitor recommended)

Specifications

Size:                                            24.3 cm x 23.6 cm x 9.9 cm (9.55" x 9.3" x 3.9")

Weight:                                        5 kg (11 lb)

Operating Temperature:            10°C to 70°C (50°F to 95°F)

Storage Temperature:                -20°C to 70°C (14°F to 158°F)

Power Requirements:                115 VAC, 60 Hz, 0.5 A

 

Ordering Information

 

Product Model:        TTS-100

Order Number:         312-100-0000

 

®EBS and DMS-100 are registered trademarks of Northern Telecom.

®MS-DOS MS Windows are registered trademarks of Microsoft Corporation

 


Home | Products | What's New | F.A.Q. | Suggestions | Catalogs / Manuals | Partners/Associates | Contact Us

Questions or problems regarding this web site should be directed to [Webmaster].
Copyright © 2002 [TCM]. All rights reserved.
Last modified: 01/23/06.